SteadyTracker XtremeThe SteadyTracker Xtreme DSLR or Camcorder Support is the high performance camera stabilizer that is designed for the professional camera operator. Designed for cams up to 8 lbs.
5 Different Shooting Modes:
- Flying Mode-Smooth motion shots. Tilts, pans & Dutch angles while in motion.
- Monopod Mode- Static tilts, pans, Dutch's & zooms.
- Self Supported Mode- Gets locked off shots.
- Static Body Mounted Modes- Tilts, pans, Dutch's, zooms and ready to fly.
- Periscope Mode- Static tilts, pans, booms, Dutch's and high flying shots.
Why SteadyTracker?
- Steady motion shots – Add more value to your production and make more money on every shot.
- Fluid appearance – Smooth movements, no jerky actions.
- Floating shots – Appears as if the camera is floating.
- Better than a Monopod - Stands on its own.
- Flexible – you can get any angle because it is not connected to you.
- Reliable – Sturdy alloy construction.
- Simple - Uses counter balance, without gyros or gimbals.
- Powder coated finish – Preserves the appearance.
- Comfortable handling – Foam grip is soft, easy to handle and control.
- Ergonomically designed – Comfortable to use for long periods.
- Fast / Easy Setup - Sets up in minutes.
SteadyTracker gets the shots that get the jobs.
For those dreamy, floating shots, we offer the SteadyTracker. SteadyTracker DSLR or Camcorder Support is
a simple counter balance device designed to eliminate shake, roll and
yaw when doing handheld shots. Designed for modern hand held
camcorders, SteadyTrackers allow you to get shots that appear to float
in the air. It eliminates the yaw and roll tendencies that usually
happen with handheld shooting by providing a counter balance on the
bottom of the SteadyTracker.
SteadyTracker is simple to set up, a cinch to maintain
and is easy to operate while taking amazing footage. The SteadyTracker
gives you the ability to shoot subject matter that is impossible to
shoot otherwise. Take amazing footage as you walk, run, travel
upstairs, ski, ride on a motorcycle or even shoot out of a moving car.
Expand the creativity of your production by engaging the viewers when
making them a part of the action. The competition can fly, pan, boom,
and tilt but there is no control of the device during these moves. This
is what sets the SteadyTracker DSLR or Camcorder Support apart from the others, with the SteadyTracker Video Camcorder Support System
you can accelerate and decelerate when panning, quickly start/stop,
reverse directions while flying, tilt smoothly at the start or end of a
boom, or dutch off the axis during a flying move. All that at a truly
affordable price.
SteadyTrackers have been designed for handheld use,
body supported use, and self supported use. When hand held you can
smoothly circle around your subject, dutching, booming, and tilting on
the fly, changing angles and framing just like in music videos. You can
do chase scenes, go up and down stairs, jump off walls, go over picnic
tables, follow people in cars, shoot weddings, receptions, love
stories, sports, documentaries, choirs, plays, etc. SteadyTrackers have
been used shooting water skiers and wake boarders, shooting skiers and
snow boarders, and a wide variety of sporting events. SteadyTrackers
make getting that motion shot easy and smooth without the shake, rattle
and roll of a handheld camera.
When body mounted it rests
on your leg letting you zoom and focus with a heads up position with
both eyes free to monitor or look for new scenes. Pull it up to your
body with your eye against the viewfinder for traditional zooming style
shots. Lift it up on your shoulder and shoot over people’s heads while
looking in the color monitor for perfect framing. When self supported
you can tilt and pan "monopod style" from the floor or the edge of a
table. Set it up like a tripod and get in the shot yourself. This lets
you completely rest as you think of your next shot.
Mounting your camera on the included release plates
takes less than a minute and again less than a minute to balance the
whole unit. No other steady system can be set up and ready to go, so
you never miss a shot and you can get in and out of the job quickly
thus saving time and saving money and getting back out there for that
next job. All that while your competitor is busy unrigging and packing
up their body mounted steady rig.
When your done, the SteadyTracker can be simply put
down on the ground. It has feet to allow the SteadyTracker to stand up
with your camera elevated so as to protect your camera. Unlike
traditional monopods, which can not be simply put down, the
SteadyTracker can be set down and retrieved in seconds, so you are
ready for the special shot. No need for long set up times, since you
simply pick up the SteadyTracker DSLR or Camcorder Support and start shooting.
SteadyTrackers can be used
for low mode shooting as well. Simply add the optional low mode
accessory for either the SteadyTracker Xtreme or the SteadyTracker
UltraLite and now you can shoot from a dogs point of view. Get shots
from real low and get really cool speed sensation.
SteadyTracker Xtreme carry weight: 4.2 lbs.
Assembled Height 23.5 inches.
Disassembled Length (longest piece) 22 inches.
CobraCraneUSA caries a full list of camera accessories for your CobraCrane or
SteadyTracker Support System:
- Camera Cranes
- Camcorder Cranes
- DSLR Cranes
- Camera Booms
- Camera Jibs
- Video Cranes
- Video Jibs
- Camera Stabilizer
- Camcorder Stabilizer
- Camcorder Support
- DSLR Support
- Video Camera Support
- Video Camera Stabilizer
- Camera Lens Controllers
- Mini LCD's
- LCD Mounting Hardware
- Camera Tripods
- Camera Dollies with Track
- Camera dolly
- Dolly Track
- Tripod video dolly
- Track Dolly
- Manfrotto Camera Dolly
- Manfrotto Video Camera Tripods
- Widescreen 7" Mini LCD Portable Monitors
- Lighting
- Telepromters
- Litepanels
|
